简体中文  ENGLISH  
    
Products News Support Marketing Network About Us Contact Us
 Current position:Home >> News
 
Why Choosing The Auto Darkening Welding Helmets
Rizhao City Kaiyue Electronics Co., Ltd.   发布时间:2015-7-9

Auto Darkening Welding Helmets are amazing masks that have a clear lens when the welding machine doesn't work but within 1/25,000 of a second will turn to dark in order to keep your eyes safe.

The Auto Darkening Welding lens is a great convenience when you’re welding so you have no issues on welding while you would normally be pulling down your dark lens. The auto darkening lens will also protect you against UV and IR wavelengths. Many Auto Darkening welding helmets have high and low sensitivity adjustment as well as automatic power on and off.

Seriously when the welding arc radiation by the light sensor sampling and trigger control circuit, control circuit output voltage to the liquid crystal light valve on the liquid crystal light valve under the effect of electric field, the from transparent to opaque state, uv transmittance is very low.And the part through the liquid crystal light valve infrared ray is absorbed by the filter.Once the arc extinguishing, the light sensor signal, no control circuit is no longer the working voltage, liquid crystal light valve back to transparent state

The main technical requirements
1. Size: The effective observation of size is not less than 90 mm x 40 mm.
2. The original performance: light shading, ultraviolet/infrared transmittance, parallelism should comply with the provisions of the GB3690.1-83.

3. Strengthen performance: the observation window at room temperature with 45 grams of steel ball falling from the height of 0.6 m free continuous impact three times should be without any damage.
4. Response time should comply with the relevant provisions.
 
 Links
ROKIO WEBSITE ON ALIBABA.COM 
Copyright:Rizhao City Kaiyue Electronics Co., Ltd. Address:Economic Development Zone, Rizhao City, North Road 15, Tel+86-633-5532666 5532999 Fax0633-5532333 鲁ICP备09063405号